File Specifications

More information

The stated delivery time can only be relied upon once a proper, usable file has been supplied.

It is therefore important that files are supplied as correctly as possible, so that production can start immediately.

To ensure this process runs as smoothly as possible, we ask you to carefully review and follow our file specifications.

File specifications

Our prints are digitally printed. Files for printing must therefore be supplied in CMYK.

We do NOT accept InDesign files.

If files are nevertheless supplied in the above format, this is at the customer's own risk!

Please note: If your design was created in InDesign, save the file as a JPG at the highest quality with a minimum of 100 DPI (design at 1:1 = 100 DPI, design at 1:10 = 1000 DPI, etc.) or save it as an EPS. Please do NOT supply an exported PDF!

When using photos/images (pixel files), a good-quality image must remain at a minimum of 100 dpi at actual size. Please note! This is the minimum number of dpi required to produce a good digital print. A higher dpi is possible; however, this will often make files unnecessarily large. Large files take unnecessary time for both you and us. Files must be saved as JPG at the highest quality.

When supplying vector files, it is important that all text is converted to outlines. Files may be created at 10% scale to reduce file size. Please note! There must be no linked files in the artwork. This prevents missing links in the artwork to be printed. The artwork must also be checked in overprint mode to ensure that no elements are set to "Overprint". These elements will not be printed during the printing process!

We only accept PDF, AI or EPS files.

If desired, we recommend working with Coated PMS colours (solid coated), so that we can use them as a colour reference.

Crop marks and bleed (overfill) are not required. Final size is sufficient for us.

If eyelets are added to the fabric, please keep text and logos at least 5 cm from the edge.

If the fabric is finished with pole pockets, please take into account possible bulging of the fabric caused by the poles in the pockets.

The larger the pole pocket / the thicker the pole inserted into the pocket, the more space is needed between the edge and the text / logo. As a guideline for the safe distance, use twice the diameter of the pole.

Sending files

Files up to 10 MB can be emailed to info@macsummum.nl

For files larger than 10 MB, please use WeTransfer or another transfer platform.

The overview below summarises the file specifications once again.

pixel files
artwork in CMYK
100 dpi at actual size
scale 1:1 = 100 dpi
scale 1:10 = 1000 dpi
etc.
supply artwork at final size; no crop marks or bleed (overfill) required
finish with eyelets: keep text and logos at least 5 cm from the edge
finish with pole pockets: the larger the pocket, the greater the distance between text and logos and the edge; use at least twice the pole diameter as a guideline
save as JPG at the highest quality

vector / outline files
artwork in CMYK
convert all text to outlines
no linked files
do not set artwork to "Overprint"
use PMS colours if desired (solid coated)
supply artwork at final size; no crop marks or bleed (overfill) required
finish with eyelets: keep text and logos at least 5 cm from the edge
finish with pole pockets: the larger the pocket, the greater the distance between text and logos and the edge; use at least twice the pole diameter as a guideline
save as PDF, AI or EPS
Call for advice